Acd Group Pilot Number - NEC Electra Elite IPK II Programming Manual

Document Revision 1
Level:
IN
Description
Use
each ACD Group. This is the number users dial to transfer calls to the ACD Group.
Normally, you should use unassigned extension numbers (e.g., 500) for the master
number. If you want to use an extension number which, by default, has a port number
assigned (for example: in the 101~199, 3101~3257), first remove the default
assignment. For example, to use extension number 125 as an ACD Master Number,
first give extension port 025 a different extension assignment.
Input Data
Feature Cross Reference
J
J
2 - 68
Program 11 : System Numbering
Program 11-17 : ACD Group Pilot Number
ACD Group Number
Default
No ACD Group Pilot Numbers assigned to any ACD Group (1~64).
H
Conditions
None
Automatic Call Distribution (ACD)
Multiple Directory Numbers/Call Coverage Keys

11-17 : ACD Group Pilot Number

to assign the ACD Master Number for
Item
ACD Group Pilot Number
No.
01 Dial (Up to 8 digits)
Electra Elite IPK II
01~64
Program 11 : System Numbering