System Alarm Report - NEC Electra Elite IPK II Programming Manual

Document Revision 1
Level:
IN
Description
Use Program 90-11 : System Alarm Report to define the details of the system alarm
report.
Input Data
Item
No.
01
02
03
04
05
06
07
08
09
10
2 - 550
Program 90 : Maintenance Program
Item
System Alarm Display Telephone
Assign the display multiline extension number that
should receive system alarms.
Report Method
When alarm reports are to be EMailed, set this
option to "1".
--- Not Used ---
--- Not Used ---
--- Not Used ---
SMTP Host Name
When alarm reports are to be EMailed, set the SMTP
name (ex: smtp.yourisp.com). Contact your ISP
(internet service provider) for the correct entry if
needed.
SMTP Host Port Number
When alarm reports are to be EMailed, set the SMTP
host port number. Contact your ISP (internet service
provider) for the correct entry if needed.
To EMail Address
When alarm reports are to be EMailed, set this EMail
address to which the report should be sent.
Reply Address
When alarm reports are to be EMailed, set this EMail
address to which any replies should be EMailed.
From Address
When alarm reports are to be EMailed, set this EMail
address from which the report is being sent.

90-11 : System Alarm Report

Input Data
Extension Number
(Up to 8 digits)
0 = No Report
1 = EMail Address
Up to 255 Characters
0~65535
Up to 255 Characters
Up to 255 Characters
Up to 255 Characters
Program 90 : Maintenance Program
Electra Elite IPK II
Default
No Setting
0
No Setting
25
No Setting
No Setting
No Setting