Service Code Setup (For Service Access) - NEC Electra Elite IPK II Programming Manual

Document Revision 1
Level:
IN
Description
Use Program 11-12 : Service Code Setup (for Service Access) to customize the
Service Codes which are used for service access. You can customize additional Service
Codes in Programs 11-10, 11-11, and 11-13 through 11-16.
The following chart shows:
J
J
J
J
J
Input Data
Item
No.
01
02
03
04
05
06
07
08
2 - 56
Program 11 : System Numbering

11-12 : Service Code Setup (for Service Access)

The number of each code (01~59).
The function of the Service Code.
The type of telephones that can use the Service Code.
The default entry. For example, dialing 705 (code 05) will cancel a previously set
Camp-On.
Programs that may be affected with the changing the code.
If you change a Service Code, be sure to record your entry in the "New" column.

Item
Bypass Call
Activating Call Forwarding/Do Not
Disturb Override. This code is only
available if you disable the voice mail
Single Digit dialing code in Program
11-16-09.
Conference
Override (Off-Hook Signaling)
Set Camp-On
Cancel Camp-On
Switching of Voice Call and Signal
Call
Step Call
Barge-In
Terminals Default
MLT, SLT 707
MLT, SLT #1
MLT, SLT 709
MLT, SLT 750
MLT, SLT 770
MLT, SLT 712
MLT, SLT 708
MLT, SLT 710
Program 11 : System Numbering
Electra Elite IPK II
Related
New
Program
11-16-09