Department Group Assignment For Extensions - NEC Electra Elite IPK II Programming Manual

Document Revision 1

16-02 : Department Group Assignment for Extensions

Level:
IN
Description
Use Program 16-02 : Department Group Assignment for Extensions to set the
Department Groups. The system uses these groups (64 Department Groups) for
Department Calling. Assign pilot numbers to Department Groups you set up in
Program 11-07. This lets system users place calls to the departments. Use Program
16-01 to set the priority of each extension within each Department Group. When a call
comes into the group, it may ring the extensions in order of their priority.
Input Data
Item
No.
01

Feature Cross Reference
J
2 - 146
Program 16 : Department Group Setup
Extension Number
Group
Priority
Number
1~64 1~999
The initial value of a priority becomes the ports numerical order assigned in Program 11-02 and 11-04.
(Extension ports are 1~ 256. Virtual extension ports are 1-256.)
Conditions
None
Department Calling
Default Description
1 – xxx Set up the Department Group called
(See
by the pilot number and the extension
Note)
priority when a group is called.
Call Pickup Groups are set up in 23-
02.
Program 16 : Department Group Setup
Electra Elite IPK II
Maximum 8 digits
Related
Program
11-07
16-01