Wireless Dect Measurement - NEC Electra Elite IPK II Programming Manual

Document Revision 1
Program 83 : Hardware Setup for IPK II Wireless
Level:
MF
Description
(This program is available only via telephone programming and not through PC
Programming).
Use
Station measurement.
Input Data
Feature Cross Reference
J
2 - 510
Program 83-12 : Wireless DECT Measurement
Item
No.
01
DECT Measurement
This program measures the length of cables connecting the PCB
and Base Stations so that the system can find the best signal
transmitting timing for handover. Enter Program 83-12-01, press 1
then HOLD. The system will then restart all Base Stations/RFPs
(this takes 3-5 minutes) and then they will use the best timing
possible. This program should be used any time the Base Station
configuration is changed (adding or deleting Base Stations or
changing connecting cables).
Conditions
None
Wireless-DECT

83-12 : Wireless DECT Measurement

Item
Program 83 : Hardware Setup for IPK II Wireless
Electra Elite IPK II
to define the Wireless DECT Base
Input
Data
0~9
Default
No
Setting