DR 400 | Basic Workflow | 75
Step 2: select the exposure
In the operator room:
At the NX workstation, select the thumbnail for the exposure in the Image
Overview pane of the Examination window.
The default X-Ray exposure parameters for the selected exposure are sent
to the modality and displayed on the software console.
The selected DR Detector is activated.
The DR Detector Switch shows which DR detector is active and shows its
status.
• Flashing: starting up
• Green (constant): ready for exposure
The radiographic table or radiographic wall stand lights up in blue,
indicating the selected modality position.
3231E EN 20210708 1530