158 | DR 400 | Radiographic wall stand
To stop movement and lock the bucky into position, release the switch.
Tilting
To tilt the bucky, press and hold the button on the tilting handle and move the
bucky. The scale for the angle is visible at the mounting point of the bucky.
To lock the bucky into position, release the button on the tilting handle.
Related Links
Centering and collimating
3231E EN 20210708 1530
CAUTION:
The maximum load for the bucky movement in vertical direction
is 20 kg. The bucky may slip downward when applying excessive
load.
Note: Do not move the bucky with excessive force to the end
stop positions.
Note: The bucky can be tilted to horizontal position. Do not use
the bucky as a seat.
on page 173