Step 2: Select The Exposure - AGFA DX-D 300 User Manual

56 | DX-D 300 | Operation

Step 2: Select the exposure

In the operator room at the NX workstation:
Select the thumbnail for the exposure in the Image Overview pane of the
Examination window.
The selected DR Detector is activated. The DR Detector Switch shows
which DR Detector is active and shows its status.
The default X-Ray exposure parameters for the selected exposure are sent
to the modality and displayed on the software console.
The default U-arm position for the selected exposure is sent to the
modality and displayed on the software console, for automatic positioning
of the U-arm.
0172G EN 20230627 1651
U-arm with integrated DR Detector
Portable DR Detector in the DR bucky
Free exposure using a portable DR Detector