Using Dx-D 45C, Dx-D 45G, Xd 10, Xd⁺10 Only Outside The Bucky - AGFA DR 400 User Manual

184 | DR 400 | Bucky
Orientation in the radiographic wall stand left loading
• To use the detector in portrait orientation, insert the detector in portrait
mode with the cable at upper left hand side.
• To use the detector in landscape orientation:
1. Insert the detector in portrait mode with the cable at upper left hand
2. Rotate the detector in the bucky.
Figure 77: Landscape orientation in the radiographic wall stand left loading
Orientation in the radiographic wall stand right loading
• To use the detector portrait orientation, insert the detector in portrait
mode with the cable at bottom right hand side.
• To use the detector in landscape orientation:
1. Insert the detector in portrait mode with the cable at bottom right
2. Rotate the detector in the bucky.
Figure 78: Landscape orientation in the radiographic wall stand right loading
Using DX-D 45C, DX-D 45G, XD 10, XD⁺10 only outside the
bucky
Use the DX-D 45C, DX-D 45G, XD 10 and XD⁺10 detector only for free
exposures. Do not put the detector inside the bucky of the radiographic table
or the radiographic wall stand.
3231E EN 20210708 1530
side.
1
hand side.
1
2
2