Step 2: Select The Exposure - AGFA DR 400 User Manual

62 | DR 400 | Getting started

Step 2: select the exposure

In the operator room:
At the NX workstation, select the thumbnail for the exposure in the Image
Overview pane of the Examination window.
The default X-Ray exposure parameters for the selected exposure are sent
to the modality and displayed on the Software Console.
The selected DR Detector is activated.
The RAD Table or RAD Wall Stand lights up in blue, indicating the
selected modality position.
The DR Detector Switch shows which DR Detector is active and shows its
status.
• Red (flashing): starting up
• Green (constant): ready for exposure
3231A EN 20150710 1114