Step 5: Execute The Exposure - AGFA DR 400 User Manual

78 | DR 400 | Basic Workflow

Step 5: execute the exposure

In the operator room:
Press the exposure button to execute the exposure.
In the operator room at the NX workstation:
• The image is acquired from the DR detector and displayed in the
• The actual X-Ray exposure parameters are sent back from the
• If collimation is applied, the image is automatically cropped at the
3231E EN 20210708 1530
Make sure the generator is ready for exposure before you
press the exposure button.
WARNING:
During exposure ionizing radiation is emitted by the X-ray
system. To indicate the presence of ionizing radiation, the
radiation indicator on the control console lights up.
WARNING:
Do not select another thumbnail until the preview image is
visible in the active thumbnail.
thumbnail.
generator to the NX workstation and are shown in the Image Detail
pane.
collimation borders.