Radiographic wall stand exposures
1. Adjust the height of the bucky on the radiographic wall stand.
2. Position the patient in front of the radiographic wall stand.
3. Move the table top away from the radiographic wall stand.
4. Rotate the X-ray tube 90° to face the radiographic wall stand.
Check the angle on the angle display.
5. Move the X-ray tube stand towards the radiographic wall stand.
6. Adjust the height of the X-ray tube to center the X-ray exposure field on
the bucky using the collimator light.
Figure 31: Radiographic wall stand exposures
DR 400 | Basic Workflow | 93
3231E EN 20210708 1530