Cables, Transducers And Accessories - AGFA DR 400 User Manual

262 | DR 400 | Product Information

Cables, transducers and accessories

Cables, transducers and accessories which were tested and found to comply
with the collateral standard IEC60601-1-2 (EMC):
from;
to
Transfer point table;
transfer point wall stand
control room (light push button);
table input terminal
control room (lamp red);
table input terminal
control room (lamp yellow);
table input terminal
control room (door contact);
table input terminal
control room (Com A);
table input terminal
control room (Com B);
table input terminal
control room (ground);
table input terminal
3231E EN 20210708 1530
CAUTION:
Use of accessories, transducers and cables other than those
specified or provided by the manufacturer of this equipment
could result in increased electromagnetic emissions or
decreased electromagnetic immunity of this equipment and
result in improper operation.
type;
maximum length
10 x AWG21 (0.5 mm
;
20 m
2 x AWG21 (0.5 mm
15 m
2 x AWG18 (1.0 mm
15 m
2 x AWG18 (1.0 mm
15 m
2 x AWG18 (1.0 mm
15 m
9 pin sub D;
20 m
Standard RS-232 cable (9
pin sub D);
20 m
2
1 x AWG8 (10 mm
;
15 m
remark
unshielded
2
)
not delivered
2
);
with the sys-
tem
not delivered
2
);
with the sys-
tem
not delivered
2
);
with the sys-
tem
not delivered
2
);
with the sys-
tem
shielded
shielded
mandatory
)