Maintenance; Maintenance Of The Radiographic Table - AGFA DR 400 User Manual

60 | DR 400 | Introduction to DR 400

Maintenance

Always consult the Agfa Service documentation and an Agfa trained and
authorized Service engineer for complete maintenance schedules.
Maintenance of the DR Detector
The DR Detector requires regular calibration. Calibration instructions are
described in the DR Detector Calibration Key User Manual (doc 0134).
Topics:
• Maintenance of the radiographic table, radiographic wall stand and X-
Ray Tube Stand
Maintenance of the radiographic table, radiographic wall stand
and X-Ray Tube Stand
The X-ray unit and all components require regular maintenance to ensure the
equipment is safe and reliable for operation.
3231E EN 20210708 1530
WARNING:
Operation in unsafe condition includes the risk of radiological
exposure and injury of the patient and/or the operator. The
customer is responsible to ensure the fault-free condition of the
equipment.
WARNING:
Wear of equipment due to excessively long intervals between
service may lead to personal injury and property damage due to
worn and unsafe parts.
WARNING:
Incorrect or defective spare parts may adversely affect the safety
of the system and lead to damages, malfunctions or total failure.
Use only original spare parts provided by the manufacturer.
WARNING:
Improper changes, additions, maintenance or repair of the
equipment or the software can lead to personal injury, electrical
shock and damage to the equipment. Safety is only guaranteed
when changes, additions, maintenance or repairs are carried out
by an Agfa certified field service engineer. A non certified
engineer performing a modification or service intervention on a
medical device, acts on his own responsibility and makes the
warranty void.