Table of Contents
Advertisement
1.4.1
Two CompactPCI* Bus Segments
The ZT 5085 can be used in a configuration that supports two independent CompactPCI* bus
segments. Segment 1 consists of slots 3-9 and 11. Segment 2 consists of slots 10 and 12-18.
Each segment includes two multi-purpose slots:
•
Segment 1: Slots 9 and 11
•
Segment 2: Slots 10 and 12
Multi-purpose slots for each segment are interleaved to support Redundant Host mode (See
Section 1.4.3, "Redundant Host" on page
The two segments can be used independently by installing a system slot board in one multi-purpose
slot per segment. Peripheral boards may then be used in the additional multi-purpose slots.
Each segment also includes six peripheral slots:
•
Segment 1: Slots 3-8
•
Segment 2 Slots 13-18
These 12 peripheral slots support a single H.110 Computer Telephony bus spanning slots 3 through
8 and 13 through 18.
If using two segments, it is recommended that the System Master boards occupy either 9 and 10, or
11 and 12.
Technical Product Specification
16).
Introduction
13
Advertisement
Table of Contents
