Installing An Air Filter And A Top Hood - H3C SecPath M9000-AI-E8 Installation Manual

Figure 7 Mounting the gateway in a rack (M9000-AI-E16 gateway)

Installing an air filter and a top hood

IMPORTANT:
The M9000-AI-E16 gateway supports air filter doors. If you have ordered air filter doors, first install
the air filter doors and then install an air filter and a top hood on the M9000-AI-E16 gateway.
Only the M9000-AI-E16 gateway supports air filters and top hoods.
To install an air filter and top hood:
1. Align the holes in the top hood with the pins on the mounting bracket. Push the top hood so that
the pins enter the holes in the top hood.
2. Fasten the captive screws to secure the top hood.
7