H3C SecPath M9000-AI-E8 Installation Manual page 3

Preface
This installation guide describes the installation procedure for the H3C SecPath M9000-AI
multiservice security gateway series. It includes the following topics:
•
Chassis views.
•
Preparing for installation.
•
Installing the gateway.
•
Accessing the gateway and configuring basic settings.
•
Troubleshooting.
•
Replacing removable components.
•
FRUs and compatibility matrixes.
•
Technical specifications.
•
LEDs.
•
Cables.
•
Slot arrangement and interface numbering.
•
Engineering labels.
•
Cabling recommendations.
•
Repackaging the gateway.
This preface includes:
•
Audience
•
Conventions
•
Documentation feedback
Audience
This documentation is intended for:
•
Network planners
•
Field technical support and servicing engineers
•
Network administrators working with the M9000-AI security gateway series
Conventions
This section describes the conventions used in this documentation set.
Command conventions
Convention
Boldface
Italic
[ ]
{ x | y | ... }
[ x | y | ... ]
Description
Bold text represents commands and keywords that you enter literally as shown.
Italic text represents arguments that you replace with actual values.
Square brackets enclose syntax choices (keywords or arguments) that are optional.
Braces enclose a set of required syntax choices separated by vertical bars, from which
you select one.
Square brackets enclose a set of optional syntax choices separated by vertical bars,