Installing An Mim; Connecting The Grounding Wire; Figure 3-2 Installing The Secpath V1000-A In A Rack - H3C SecPath V1000-A Installation Manual

Installation Manual
H3C SecPath V1000-A Security Gateway
(1)
(1) Pan-head screws (4)
Figure 3-2 Installing the SecPath V1000-A in a rac

3.3 Installing an MIM

For details about installing MIMs, see "Chapter 8 Multifunctional Interface Modules".

3.4 Connecting the Grounding Wire

Caution:
When installing or using your security gateway, properly connect the grounding wire for
lightning protection and anti-interference.
The security gateway provides a grounding screw, which must be connected to the
earth ground properly to safely channel the faradic current and leakage electricity to the
ground and have the device less susceptible to electromagnetic interference (EMI).
On the rear panel of the SecPath V1000-A, the grounding screw resides at the bottom
right with a grounding mark, as shown in Figure 3-3.
(2)
(2) Rack-mount bracket
3-3
Chapter 3 Hardware Installation
(3)
(3) Guide rail
k