Table of Contents
Advertisement
2
Installing the device
WARNING!
To avoid injury, do not touch bare wires, terminals, or parts with high-voltage hazard signs.
IMPORTANT:
• The barcode on the device chassis contains product information that must be provided to local
sales agent when you return a faulty device for repair.
• Keep the tamper-proof seal on a mounting screw on the chassis cover intact, and if you want to
open the chassis, contact H3C for permission. Otherwise, H3C shall not be liable for any
consequence.
Installation prerequisites
•
You have read
•
All requirements in
Installation flowchart
The following installation options are available for the device:
•
Workbench mounting.
•
Rack mounting.
Determine the installation method according to the installation environment. Follow the installation
flowchart shown in
"Preparing for
installation" carefully.
"Preparing for
installation" are met.
Figure2-1
to install the device.
2-1
Advertisement
Table of Contents
Need help?
Do you have a question about the ICG2000 and is the answer not in the manual?