Installing The Device; Installing The Device In A Standard 19-Inch Rack; Device Dimensions And Rack Requirements; Installation Methods - H3C SR6602-I Installation Manual

3

Installing the device

Installing the device in a standard 19-inch rack

WARNING!
To avoid bodily injury and device damage, a minimum of two persons are required to install the
device.
CAUTION:
Ensure a clearance of 1 RU (44.45 mm, or 1.75 in) between the device and walls or other devices for
heat dissipation.

Device dimensions and rack requirements

To mount the device in a rack, make sure the rack meets the requirements described in Table3-1.
Table3-1 Device dimensions and rack requirements
Device dimensions
•
•
•
480 mm (18.90 in) for the chassis

56 mm (2.20 in) for the cable

management bracket at the chassis front
25 mm (0.98 in) for the power supply

handle at the chassis rear

Installation methods

Table3-2 Installation methods
Installation methods
Installing the device by using the mounting brackets
and slide rails
Installing the device by using the mounting brackets
and a rack shelf
Height—88 mm (3.46 in)
Width—440 mm (17.32 in)
Total depth—561 mm (20.09 in)
Rack requirements
•
A minimum of 0.6 m (1.97 ft) in depth
(recommended).
•
A minimum of 70 mm (2.76 in) between
the front rack posts and the front door.
•
A minimum of 50 mm (1.97 in) between
the front rack posts to the rear door.
•
384 mm (15.12 in) to 591 mm (23.27 in)
from the front rack posts to the rear rack
posts.
Required installation accessories
•
Mounting brackets
•
Slide rails and chassis rails
•
M4 mounting bracket screws
•
M6 rack screws (user supplied)
•
Cage nuts (user supplied)
•
Mounting brackets
•
M4 mounting bracket screws
•
M6 rack screws (user supplied)
•
Cage nuts (user supplied)
•
Rack shelf (user supplied)
3-1