Generic Labels - H3C SecPath M9000-AI-E8 Installation Manual

Figure 2 Label for power cords
1
(1) Cable tie

Generic labels

A generic label is bar-shaped with fixed dimensions. It is applicable to all cables. A mark "TO:" is
located at the upper left corner in the right area of the label to identify the peer end of the cable on
which the label is affixed. The meaning of the dividing lines is the same as labels for network cables.
Figure 3 Generic label
1
(1) Dividing line on the label
TO:
2
(2) Dividing line on the label
TO:
2
(2) Cut dotted line
2