H3C SecPath M9000-AI-E8 Installation Manual page 104

Multi service security gateway series
Hide thumbs Also See for SecPath M9000-AI-E8:
Table of Contents

Advertisement

XGE2/1/4
......
XGE2/1/23
XGE2/1/24
The gateway operates in IRF mode and its IRF member device ID is 1. An interface switch
module is installed in slot 2 of the gateway and an NS-C300-TG24A1 interface module in slot
1 of the interface switch module. The interfaces on the interface module are numbered as
shown in the output of the
command.
<Sysname> display interface Ten-GigabitEthernet brief
Brief information on interface(s) in route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface
XGE1/2/1/1
XGE1/2/1/2
XGE1/2/1/3
XGE1/2/1/4
XGE1/2/1/5
......
XGE1/2/1/23
XGE1/2/1/24
DOWN DOWN
--
DOWN DOWN
--
DOWN DOWN
--
display interface Ten-GigabitEthernet brief
Link Protocol Primary IP
DOWN DOWN
--
DOWN DOWN
--
DOWN DOWN
--
DOWN DOWN
--
DOWN DOWN
--
DOWN DOWN
--
DOWN DOWN
--
5
Description

Advertisement

Table of Contents
loading

This manual is also suitable for:

Secpath m9000-ai-e16

Table of Contents