Table of Contents
Advertisement
Figure 3 Wooden pallet base
2.
Use screws to attach the L-type brackets to the chassis, as shown by callout 1 in Figure 3.
Figure 4 Attaching the L-type brackets to the pallet base
3.
Move the chassis so that the mounting holes on the horizontal ear of the L-type brackets align
with the mounting holes on the wooden pallet base. Use screws to attach the L-type brackets to
the wooden pallet base, as shown by callout 2 in Figure 3.
4.
Cover the chassis with the packing bag from top down, and then tape the bag to the plastic
cover of pallet base.
5.
Use the carton to cover the chassis from top down with the mark side aligning with the front
panel of the chassis. Erect one paper angle bead along each vertical edge of the
5
chassis.
Advertisement
Chapters
Table of Contents
