Table of Contents
Advertisement
Item
2
Installing the device
WARNING!
To avoid injury, do not touch bare wires, terminals, or parts with high-voltage hazard signs.
IMPORTANT:
• The barcode on the device chassis contains product information that must be provided to local
sales agent when you return a faulty device for repair.
• Keep the tamper-proof seal on a mounting screw on the chassis cover intact, and if you want to
open the chassis, contact H3C for permission. Otherwise, H3C shall not be liable for any
consequence.
The installation method is the same for the H3C MSR3610-I ICT converged gateways. This section
uses the MSR3610-I-DP as an example.
Installation prerequisites
•
You have read "Preparing for installation" carefully.
•
All requirements in "Preparing for installation" are met.
Installation flowchart
You can install the device on a workbench or in a rack.
Determine the installation method according to the installation environment. Follow the installation
flowchart shown in
Requirements
•
Online documents are available.
Figure2-1
to install the device.
7
Result
Advertisement
Table of Contents
