H3C SecPath M9000-AI-E8 Installation Manual page 103

Multi service security gateway series
Hide thumbs Also See for SecPath M9000-AI-E8:
Table of Contents

Advertisement

NOTE:
To install an interface module or service module on the gateway, first install it on an interface
switch module and then install the interface switch module on the gateway. For the interface
module slots and service module slots, see the card manuals that come with the interface modules
and service modules.
Example
You can execute the
<Sysname> display device
Slot NO
1
Interface numbering
The gateway provides many types of interfaces, including console, M-GigabitEthernet, Ten-
GigabitEthernet, Forty-GigabitEthernet, Hundred-GigabitEthernet, blade, aggregate, tunnel, Virtual-
Template, and VLAN interfaces.
The numbering of the gateway interfaces varies by the gateway mode.
Standalone mode—interface-type X/Y/Z.
IRF mode—interface-type W/X/Y/Z.
Where,
interface-type—Type of the interface such as GigabitEthernet interface.
W—IRF member device ID.
X—Number of the slot where the card resides. For more information about the slot number on
the gateway, see
Y—Number of the slot where the subcard resides on the interface switch module. The value is
1 or 2.
Z—Number of the port on the card. The number starts from 1 for each port type.
The management ports are numbered M-GE0/0/0, M-GE0/0/1, M-GE0/0/2, and M-GE0/0/3,
respectively when the gateway operates in standalone mode and M-GE1/0/0/0, M-GE1/0/0/1, M-
GE1/0/0/2, and M-GE1/0/0/3, respectively when the gateway operates in IRF mode.
Example
The gateway operates in standalone mode and has an interface switch module installed in
slot 2 and an NS-C300-TG24A1 interface module installed in slot 1 of the interface switch
module. The interfaces on the interface module are numbered as shown in the output of the
display interface Ten-GigabitEthernet brief
<Sysname> display interface Ten-GigabitEthernet brief
Brief information on interface(s) in route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface
XGE2/1/1
XGE2/1/2
XGE2/1/3
display device
Brd Type
Brd Status
NSQM5MBSHA1
.
Table 1
Link Protocol Primary IP
DOWN DOWN
DOWN DOWN
DOWN DOWN
command to view the slot arrangement on the device.
Subslot
Normal
0
--
--
--
4
Sft Ver
M9000-AI-E8-9001P06
command.
Description
Patch
None

Advertisement

Table of Contents
loading

This manual is also suitable for:

Secpath m9000-ai-e16

Table of Contents