Installing Ac Power Supplies - H3C SecPath M9000-AI-E8 Installation Manual

1. Connect the DC power cord connector to the DC input receptacle of the power supply.
2. Fasten the screw on the connector to secure the connector to the receptacle.
3. Connect the other ends of the DC power cords to a DC power source, with the positive wire (+)
to the positive terminal and the negative wire (-) to the negative terminal.
Figure 24 Connecting a DC power cord (M9000-AI-E16 gateway)

Installing AC power supplies

Available AC power supplies
The PSR2400-54A, PSR3000-54A, and PSR3000-54AHD AC power supplies are available for the
gateway. Table
and PSR3000-54AHD AC power supplies, respectively.
Table 3 PSR2400-54A power supply specifications
Item
Rated input voltage
Input voltage
Rated input current
Rated output voltage
Maximum output current
Maximum output power
Table 4 PSR3000-54A power supply specifications
Item
Rated input voltage
3, Table 4, and Table 5 describe the specifications of PSR2400-54A, PSR3000-54A ,
Specifications
•
100 VAC to 130 VAC @ 50 or 60 Hz
•
200 VAC to 240 VAC @ 50 or 60 Hz
90 VAC to 264 VAC @ 47 or 63 Hz
16 A
54 VDC
44.5 A
•
100 VAC to 130 VAC @ 60 Hz: 1200 W
•
200 VAC to 240 VAC @ 50 Hz: 2400 W
Specifications
•
100 VAC to 240 VAC @ 50 or 60 Hz (AC input)
22