Figure 9-1: Application Menu - Ametek California Instruments MX15 Series User Manual

9.3.1.3 Tests Performed
9.3.1.3.1 NORMAL STATE
AC Source:
1. Normal State Voltage and Frequency test
2. Voltage unbalance test
3. Waveform Distortion test
4. Voltage Modulation test
5. Frequency Modulation test
6. Momentary Power Interrupt (Under voltage) test
7. Voltage Surge (Over voltage) test
8. Frequency Transients test(Group 1 only)
Frequency Variation test (Group 2 and 3 only)
9.3.1.3.2 EMERGENCY TEST
AC Source:
1. Emergency Voltage and Frequency minimum
2. Emergency Voltage and Frequency maximum
3. Voltage unbalance
9.3.1.3.3 ABNORMAL TEST
AC Source:
1. Abnormal Voltage minimum
2. Abnormal Voltage maximum
3. Voltage Drop
4. Voltage Surge
5. Frequency Transients test (group 1 only)
9.3.1.4 Front Panel Operation -160
To perform a test from the keyboard, Press the MENU key several times until the
APPLICATIONS/OPTIONS Menu appears, select the APPLICATIONS screen. The
APPLICATIONS screen will appear as shown in Figure 9-1.
Scroll to the RTCA/DO-160D entry using the up and down cursor keys. Press the ENTER key to
select the RTCA/DO 160D main menu. The screen will appear as shown in Figure 9-2.
Note: The user has to turn on the Output relay before starting a test.
MX15

Figure 9-1: Application Menu

135