Ametek California Instruments MX15 Series User Manual page 83

Ac and dc power source

Table of Contents

4.2.10 CALIBRATION Menus

Measurement Calibration:

Output Calibration:

The measurement calibration menu can be used to perform routine calibration of the internal

measurement system. The recommended calibration interval is 12 months. To enter the

calibration screens, the calibration password must be entered first.

The output calibration menu can be used to perform routine calibration of the voltage output and

programmable impedance. The recommended calibration interval is 12 months. To enter the

calibration screens, the calibration password must be entered first.

Note: Refer to chapter 6 for details on routine calibration procedures and equipment

requirements. Do not attempt calibration without consulting the user manual.

This menu also contains the LCD viewing angle adjustment.

MX15 Series

Table of Contents