Ametek California Instruments MX15 Series User Manual page 93

Waveform selection and frequency programming will be subject to the above limit. An error
message will be generated to reflect this type of error:
"22, Waveform harmonics limit"
Transient editing will also generate the above error during keyboard entry. Remote transient
entry will not check for the error until transient execution.
4.4.6 Switching Waveforms
Waveforms can be switched as part of the transient system. Each transient type setup menu has
a FUNCTION field. This field allows selection of any of the standard or custom waveforms
available in the selected group. Refer to the section on transients for more details on using
transient list to switch output waveforms.
MX15 Series 93