3.7.3
BNC Connectors
BNC connectors. Functions are called out on rear panel decal. Table shows connections from
left to right when standing at the rear of the MX15 cabinet.
BNC
1
Trigger Input (TTL input)
2
Trigger Output (TTL output) (Same signal connection as Function Strobe. Some units may not have
this output connected. If you don't get an output trigger on this BNC, use the Function Strobe BNC
instead.)
3
Function Strobe (TTL output) (Same signal connection as Trigger Output)
4
Clock (TTL output on M aster / TTL input on A uxiliary)
5
Lock (TTL output on M aster / TTL input on A uxiliary)
3.7.4
External Sense Connector
Pin
1
Phase A sense
2
N/C
3
N/C
4
Neutral sense
MX15 Series
Description
Table 3-5: BNC Connectors
Description
Table 3-6: External Sense Connector
49