Figure 3-4: Rear Panel - Ametek California Instruments MX15 Series User Manual

Note: If any MX15 system failure has occurred on any part of the MX15 system, AC input
power must be removed immediately and not restored until the system has been
inspected by a qualifier service technician.
Always turn off the On/Off Circuit breaker before re-applying AC input power.
CAUTION:
Note: Under no circumstances should AC input power be applied if one or more of the
AC input line fuses have failed and opened up.
38
The AC input fuses can only be checked if the MX unit is
completely de-energized and disconnected from any AC power
input.

Figure 3-4: Rear Panel