Ametek California Instruments MX15 Series User Manual page 87

4.2.14 LIMIT Menu
The Limit menu displays the maximum available value for voltage, frequency and current range
of the power supply. This screen is used for information only and contains no user changeable
fields. The limit values shown cannot be changed.
ENTRY
LIM V OLT
LOW
LIM V OLT
HIGH
LIM V OLT
X form
LIM FREQ
LOW
LIM FREQ
HIGH
LIM CURR
PHA SE (C)
MX15 Series
Low V oltage Range Displays maximum available output voltage in the low voltage
range.
High V oltage Range Displays maximum available output voltage in the high voltage
range.
Extra V oltage Range Displays maximum available output voltage in the extra voltage
range. (HV or EV option)
Low Frequency Limit Displays minimum available output frequency.
High Frequency Limit Displays maximum available output frequency
C range Displays maximum available current in low voltage range at full
power.
Phase Setting Displays phase angle for phase C. V alid values are 120 for three-
phase or mode configuration, 0 for single-phase only
configuration. A ny other value indicates split (2) phase
configuration. The M X 15 is single phase only, so this will always
show a value of 0.
DESCRIPTION
87