Ametek California Instruments MX15 Series User Manual page 17

Parameter Specification
Data bits: 7, 8
Stop bits: 1,2
Baud rate: 9600 to 115,200 bps
Syntax: IEEE 488.2 and SCPI
USB Interface: Standard USB 2.0 peripheral.
Data transfer rate: 460,800 bps
Syntax: IEEE 488.2 and SCP.
Note: Use of the USB port to control more than one power source from a single PC is
not recommended, as communication may not be reliable. Use GPIB interface for multiple
power source control.
Note: Not available on older M X 15 models.
LA N Interface: Option –LA N. W hen the LA N interface is installed, the RS232 interface is disabled.
RJ45 Connector, 10BaseT, 100BaseT or 1000BaseT,
Data transfer rate: 460,800 bps
Protocol: TCP/IP.
Syntax: IEEE 488.2 and SCP
Note: Disconnect any USB connection when using the LA N interface.
Current Limit M odes: Two selectable modes of operation:
Constant current mode (voltage folds back with automatic recovery)
Constant voltage mode with trip-off (Relays open).
MX15 Series 17