Table of Contents
Advertisement
Available languages
Available languages
Working
with the Programming
Station
Working
with the Programming
Station
The Programming
Station allows you to work with the TNC as
with any other TNC, but without the machine operating
modes. The TE 400 L keyboard unit provides the Same
arrangement
of keys as the Standard keyboard, however with
the addition of soft keys for selecting functions that appear at
the bottom of the PC Screen.
All entries for TNC programming
are made on the TE 400 L
keyboard unit. The PC keyboard serves only for switching
between DOS Operation and TNC programming,
and for
leaving the Programming Station mode.
Batch files for starting
the Programming
Station
Your C:\PP directory contains the files PP.EXE, PPCOMI .BAT,
and PPCOMZ.BAT. A batch file (PPCOMI .BAT or
PPCOM2,BAT) calls the program PP.EXE and gives it
Parameters that it needs to Start the Programming
Station.
Commands
and Parameters
in the batch files
PPCOMI ,BAT:
@PP
C:\TNCPGMS
3F8
4
38400
7
E
1
%1
PPCOM2.BAT:
@PP
C:\TNCPGMS
2F8
3
38400
7
E
1
%1
@
PP
C:\TNCPGMS
3F8 / 2F8
4/3
38400
7E1
%1
Suppresses display of the batch file name on
the PC Screen
Calls the program PP.EXE
Directory on the PC hard disk
for TNC files
Interrupt addresses for COM 1 (3F8) or
COM 2 (2F8)
Interrupt number for COM 1 (4) or COM 2 (3)
Baud rate for transferring
programs between
the TNC and PC
Data format for transmission:
7 data bits, even parity, one stop bit
Variable for the /LIST Parameter
(see "Transferring
programs between PC and
LE 415 L")
29
Advertisement
Table of Contents
