Notes on reading the documentation....................8 Symbols and fonts used for marking text..................9 Software installation........................11 Overview............................... 12 Downloading the installation file.......................12 System requirements...........................12 Installing GAGE-CHEK 2000 Demo in Microsoft Windows..............13 Uninstalling GAGE-CHEK 2000 Demo....................15 HEIDENHAIN | GAGE-CHEK 2000 Demo | User’s Manual | 06/2021...
Page 4
3.9.3 Scrolling the function bar......................31 3.9.4 Moving functions on the function bar..................32 3.10 Using the function bar........................32 3.10.1 Operating elements of the function bar..................32 3.10.2 Function elements........................32 HEIDENHAIN | GAGE-CHEK 2000 Demo | User’s Manual | 06/2021...
Page 5
Configuring ScreenshotClient for taking screenshots..............46 5.6.1 Configuring the storage location and file name for screenshots..........46 5.6.2 Configuring the user interface language of screenshots............47 Creating screenshots........................... 48 Exiting ScreenshotClient........................48 Index..............................49 List of figures..........................50 HEIDENHAIN | GAGE-CHEK 2000 Demo | User’s Manual | 06/2021...
GAGE-CHEK 2000 series products. GAGE-CHEK 2000 Demo may be used only for presentation, training or testing purposes. Improper use GAGE-CHEK 2000 Demo is not intended for any use other than the intended use. Any use for other purposes is prohibited, specifically: For productive purposes in production systems...
Identifies an item of a list Example: TTL interface EnDat interface Bold Identifies menus, displays and buttons Example: Tap Shut down The operating system shuts down Turn the power switch off HEIDENHAIN | GAGE-CHEK 2000 Demo | User’s Manual | 06/2021...
.exe File DemoBackup.mcc System requirements If you want to install GAGE-CHEK 2000 Demo on a computer, the computer system must meet the following requirements: Microsoft Windows 7 or higher Screen resolution of at least 1280 × 800 recommended HEIDENHAIN | GAGE-CHEK 2000 Demo | User’s Manual | 06/2021...
Software installation | Installing GAGE-CHEK 2000 Demo in Microsoft Windows Installing GAGE-CHEK 2000 Demo in Microsoft Windows Select the temporary storage folder into which you unpacked the downloaded file with the .zip extension Further information: "Downloading the installation file", Page 12 Run the installation file with the extension .exe...
Software installation | Installing GAGE-CHEK 2000 Demo in Microsoft Windows In the Select Components installation step: Select the type of installation Activate or deactivate the option Screenshot Utility Figure 2: Installation wizard with activated options Demo software Screenshot Utility Click...
Unistallation starts, and the progress bar indicates the status of the unistallation process After uninstallation has been completed successfully, close the uninstallation wizard with OK The program has been successfully removed from your computer HEIDENHAIN | GAGE-CHEK 2000 Demo | User’s Manual | 06/2021...
3.2.1 Touchscreen and input devices The operating elements on the user interface of GAGE-CHEK 2000 Demo are operated via a touchscreen or a connected mouse. To enter data, you can use the screen keyboard of the touchscreen or a connected keyboard.
Page 19
Single pressing and holding down of the left mouse button while simultaneously moving the mouse; the starting point and end point of the movement are not clearly defined The actions initiated by swiping include Changes views HEIDENHAIN | GAGE-CHEK 2000 Demo | User’s Manual | 06/2021...
The function is activated or deactivated Slider Use the slider (horizontal or vertical) to continuously adjust values. Drag the slider to the desired position The selected value is displayed graphically or in percent HEIDENHAIN | GAGE-CHEK 2000 Demo | User’s Manual | 06/2021...
Page 21
The new feature is added Close Tap Close to close a dialog Confirm Tap Confirm to conclude an activity Back Tap Back to return to the higher level in the menu structure HEIDENHAIN | GAGE-CHEK 2000 Demo | User’s Manual | 06/2021...
Basic operation | GAGE-CHEK 2000 Demo – startup and shut-down GAGE-CHEK 2000 Demo – startup and shut-down 3.4.1 Starting GAGE-CHEK 2000 Demo Before using GAGE-CHEK 2000 Demo, you need to perform the steps for configuring the software. GAGE-CHEK 2000 Demo on the Microsoft Windows...
Basic operation | GAGE-CHEK 2000 Demo – startup and shut-down 3.4.2 Shutting down the GAGE-CHEK 2000 Demo Tap Switch off in the main menu Tap Shut down GAGE-CHEK 2000 Demo is shut down To shut down GAGE-CHEK 2000 Demo in the Microsoft Windows window, also use the Switch-off menu.
Operator type, then the product displays the Measure menu with the workspace and the function bar after starting up. If automatic user login is not activated, then the product opens the User login menu. Further information: "User login menu", Page 28 HEIDENHAIN | GAGE-CHEK 2000 Demo | User’s Manual | 06/2021...
OEM user type) is logged in, then the gear symbols appears. Settings Settings of the product, such as setting up users, configur- ing sensors, or updating the firmware Further information: "Settings menu ", Page 29 HEIDENHAIN | GAGE-CHEK 2000 Demo | User’s Manual | 06/2021...
The user interface for measuring and positioning is displayed Short description Figure 5: Measure menu The workspace shows the current position of the measuring plate The function bar provides the quick access menu and the function elements HEIDENHAIN | GAGE-CHEK 2000 Demo | User’s Manual | 06/2021...
Figure 6: File management menu List of available storage locations List of folders in the selected storage location The File management menu shows an overview of the files stored in the product's memory. HEIDENHAIN | GAGE-CHEK 2000 Demo | User’s Manual | 06/2021...
To log in another user, the logged-in user must first log out. "User login and logout", Page 23 Further information: HEIDENHAIN | GAGE-CHEK 2000 Demo | User’s Manual | 06/2021...
The Settings menu shows all of the options for configuring the product. With the setting parameters, you can adapt the product to on-site requirements. The product provides various authorization levels that grant the user full or restricted access to management and operation functionality. HEIDENHAIN | GAGE-CHEK 2000 Demo | User’s Manual | 06/2021...
Holding down the axis key: sets the current position as zero point Reference mark search performed successfully Reference mark search not performed or no reference mark detected Minimum: Lowest measured value (if the MinMax function is active) HEIDENHAIN | GAGE-CHEK 2000 Demo | User’s Manual | 06/2021...
Tapping opens a calculator with basic mathematical functions; the last result is shown in the calculator and on the function bar Reference mark search (REF) Tapping starts the reference mark search HEIDENHAIN | GAGE-CHEK 2000 Demo | User’s Manual | 06/2021...
Page 33
200 ms Functions for probing Function element Short description Edge probing (probing) Tapping starts the wizard for probing an object of measure- ment HEIDENHAIN | GAGE-CHEK 2000 Demo | User’s Manual | 06/2021...
Page 34
Specify a name for the XMG file Confirm entry with RET Tap Save The file was saved You can export or import saved configurations from or to your device via a USB mass storage product. HEIDENHAIN | GAGE-CHEK 2000 Demo | User’s Manual | 06/2021...
Page 35
Drag the function element to the right Tap Open The Open configuration dialog is opened Navigate to the folder in which the file is saved Tap the desired XMG file Tap Open The file is opened HEIDENHAIN | GAGE-CHEK 2000 Demo | User’s Manual | 06/2021...
Further information: "Basic operation", Page 17 Before you can use GAGE-CHEK 2000 Demo correctly after successful installation, you need to configure GAGE-CHEK 2000 Demo. This chapter describes how to perform the following settings: Setting the language Activating software options...
Software configuration | Activating software options Activating software options With GAGE-CHEK 2000 Demo, you can also simulate characteristics and functions that are dependent on a software option. To do so, you must enable the software option with a license key. The required license key is stored in a license file in the GAGE-CHEK 2000 Demo folder structure.
GAGE-CHEK 2000 Demo is ready for use in the desired version Copying the configuration file Before you can load the configuration data in GAGE-CHEK 2000 Demo, you must first copy the downloaded configuration file DemoBackup.mcc to an area that can be accessed by GAGE-CHEK 2000 Demo.
Further information: "Activating software options", Page 39 In order to configure GAGE-CHEK 2000 Demo for use on the computer, you must upload the DemoBackup.mcc configuration file. Tap Settings in the main menu The product settings are displayed...
ScreenshotClient | Overview Overview The standard installation of GAGE-CHEK 2000 Demo also contains the ScreenshotClient program. With ScreenshotClient, you can take screenshots of the demo software or the unit. This chapter describes how ScreenshotClient is configured and used. Information about ScreenshotClient With ScreenshotClient, you can take screenshots of the active screen of the demo software or the unit from a computer.
Further information: "Starting GAGE-CHEK 2000 Demo", Page 22 Tap Connect A connection with the demo software is established The status message is updated The Identifier and Language input fields become active HEIDENHAIN | GAGE-CHEK 2000 Demo | User’s Manual | 06/2021...
Enter the path to the storage location and the name for the screenshots into the Identifier input field Use the following syntax to enter the path and file name for screenshots: [drive]:\[folder]\[file name] ScreenshotClient will save all screenshots to the storage location entered HEIDENHAIN | GAGE-CHEK 2000 Demo | User’s Manual | 06/2021...
Use the arrow keys to select all in the Language input field The all language code is shown in red ScreenshotClient creates the screenshots in all available user interface languages HEIDENHAIN | GAGE-CHEK 2000 Demo | User’s Manual | 06/2021...
The status message is updated: Figure 12: ScreenshotClient after screenshot has been created successfully Exiting ScreenshotClient Disconnect The connection to the demo software or the unit is terminated Tap Close ScreenshotClient is exited HEIDENHAIN | GAGE-CHEK 2000 Demo | User’s Manual | 06/2021...
Figure 9: Settings menu......................... 41 Figure 10: ScreenshotClient user interface....................44 Figure 11: ScreenshotClient has been started (not connected yet)............45 Figure 12: ScreenshotClient after screenshot has been created successfully......... 48 HEIDENHAIN | GAGE-CHEK 2000 Demo | User’s Manual | 06/2021...
Page 51
DR. JOHANNES HEIDENHAIN GmbH Dr.-Johannes-Heidenhain-Straße 5 83301 Traunreut, Germany +49 8669 31-0 +49 8669 32-5061 E-mail: info@heidenhain.de Technical support +49 8669 32-1000 Measuring systems +49 8669 31-3104 E-mail: service.ms-support@heidenhain.de NC support +49 8669 31-3101 E-mail: service.nc-support@heidenhain.de NC programming ...