Table of Contents
Advertisement
Power Over
Ethernet
SFP+ Transceiver
Ports
MDI/MDI-X at 100Mbps
PoE+ supported on ports 1 to 24
PoE++ supported on ports 25 to 48
Port Link/Activity (L/A) and PoE LEDs
The 24 twisted pair ports on the x530DP-28GHXm switch have these
features:
Ports 1 to 20 support 10/100/1000Mbps operation
Ports 21 to 24 support 100Mbps/1/2.5/5Gbps operation
100 meters (328 feet) maximum operating distance per port
Auto-negotiation for speed
Half- and Full-duplex mode at 10/100Mbps
Full-duplex only at 1Gbps and higher speeds
MDI/MDI-X at 10/100Mbps
Power over Ethernet (PoE++) supported on all 24 ports
Port Link/Activity (L/A) and PoE LEDs
The basic features of PoE of the twisted pair ports on the switches are:
Supports PoE (15.4W maximum), PoE+ (30W maximum), and
PoE++ (60W maximum) powered devices
When using the PWR1200 power supply, the power budget per
power supply is 740W, up to 1480W maximum
When using the PWR800 power supply, the power budget per
power supply is 370W, up to 740W maximum
Supports powered device classes 0 to 6
Port prioritization
Mode A wiring
IEEE802.3af/at/bt compliant
The SFP/SFP+ transceiver ports support the following types of
transceivers:
x530DP-28GHXm: ports 25 to 28
x530DP-52GHXm: ports 49 to 52
Examples of SFP 1Gbps transceivers include:
AT-SPSX and LR short and long distance transceivers using multi-
mode or single mode fiber optic cable.
AT-SPTX transceiver series with RJ-45 connector for twisted pair
cable.
x530DP Series Installation Guide for Virtual Chassis Stacking
21
Advertisement
Table of Contents
