Features; Copper Ports; Power Over Ethernet Plus; Sfp Slots - Allied Telesis GS950 PS V2 Series Installation Manual

Features

Copper Ports

Power Over
Ethernet Plus

SFP Slots

Here are the hardware features of the switches.
Here are the basic features of the copper ports:
 10/100/1000Mbps
 10Base-T, 100Base-TX and 1000Base-T compliant
 IEEE 802.3u Auto-Negotiation compliant
 Auto-MDI/MDIX
 100 meters (328 feet) maximum operating distance
 IEEE 802.3x Flow Control in 10/100Mbps full-duplex mode
 IEEE 802.3x Back Pressure in 10/100Mbps half-duplex mode
 IEEE803.3z 1000Base-T Flow Control
 Support for Jumbo frames up to 10KB
 RJ-45 connectors
Here are the basic features of PoE+:

Supported on all copper ports on the GS950/10PS V2,
GS950/18PS V2, and GS950/28PS V2 Switches
 Supported on copper ports 1 to 24 on the GS950/52PS V2 Switch
 Maximum power budgets:
— GS950/10PS V2: 75W
— GS950/18PS V2: 185W
— GS950/28PS V2: 185W
— GS950/52PS V2: 370W
 PoE (15.4W at port) and PoE+ (30W at port)
 Powered device classes 0 to 4
 Per port power control
 Port priority assignments to control power distribution
 Link Layer Discovery Protocol (LLDP) for Class 4 PoE+ devices
 Alternative A mode wiring (pins 1, 2, 3, and 6)
The SFP ports support the following types of transceivers:

100Mbps SFP 100Base-FX fiber optic transceivers

1000Mbps SFP 1000Base-SX/LX fiber optic transceivers
GS950 PS V2 Series of Gigabit Ethernet PoE+ Switches Installation Guide
21