Chapter 2: Virtual Chassis Stacking
Stack Trunks of SFP+ 10Gbps Ports
54
You can build stack trunks with the 10Gbps SFP+ transceiver ports on
x530DP Series switches. See "Stacking Guidelines" on page 51.
Stacks can have up to eight switches.
Trunks have to have a minimum of two ports per switch.
SFP+ transceivers must be from Allied Telesis and be approved
for use in the product. For a list of supported 10Gbps SFP+
transceivers, refer to the product data sheet on the Allied Telesis
web site.
Note
Transceivers are purchased separately.
You can use the default 10Gbps stacking ports as regular
networking ports by disabling the stacking feature or by using the
multi-speed 5Gbps twisted pair ports as the trunk ports.
A stack trunk can have fiber optic or SP10TW direct connect
cables in the same stack. See Figure 15 on page 57.