Stack Trunks
Table 12. Default (10Gbps) and Optional (5Gbps) Trunk Ports
Switch
x530DP-28GHXm
x530DP-52GHXm
PoE++ twisted pair ports.
1.
2. PoE+ twisted pair ports.
Stack trunks connect the switches of a stack together. A stack trunk
consists of a minimum of two ports on each device. For switches with
AlliedWare Plus v5.5.0-1 or later, you can choose two ports of the trunk.
Your choices are listed in Table 12:
Optional Trunk Ports
(5Gbps
twisted pair ports)
1
21-24
2
41-48
The guidelines are discussed in the following sections:
"Stack Trunks of SFP+ 10Gbps Ports" on page 54
"Stack Trunks of 5Gbps Twisted Pair Ports" on page 58
Note
The following discussions apply to AlliedWare Plus v5.5.0-1 or later.
Earlier versions of the operating system have different trunk rules
and restrictions.
x530DP Series Installation Guide for Virtual Chassis Stacking
Additional Trunk Ports
(SFP+ 10Gbps
SFP+ transceiver ports)
25, 26
49, 50
Default Trunk Ports
(SFP+ 10Gbps
SFP+ transceiver ports)
27/S1, 28/S2
51/S1, 52/S2
53