Features; X930 Models; 10/100/1000 Mbps Copper Ports; Power Over Ethernet - Allied Telesis AlliedWare Plus Installation Manual

Chapter 1: Overview

Features

x930 Models

10/100/1000
Mbps Copper
Ports
Power Over
Ethernet
22
Here are the switches and their features:
Here are the switches in the x930 Series:
AT-x930-28GTX

AT-x930-28GPX

AT-x930-28GSTX

AT-x930-52GTX

AT-x930-52GPX

Here are the basic features of the 10/100/1000 Mbps copper ports:
24 or 48 ports per switch

10Base-T, 100Base-TX, and 1000Base-T compliant

IEEE 802.3u Auto-Negotiation compliant

Auto-MDI/MDIX

100 meters (328 feet) maximum operating distance

IEEE 802.3x flow control in 10/100Base-TX full-duplex mode

IEEE 802.3x backpressure in 10/100Base-TX half-duplex mode

IEEE 802.3ab 1000Base-T

Layer 2 and Layer 3 jumbo frames up to 13KB and 9KB,

respectively
RJ-45 connectors

Here are the basic features of Power over Ethernet (PoE) on the copper
ports on the AT-x930-28GPX and AT-x930-52GPX Switches:
Supported on ports 1 to 24 on the AT-x930-28GPX Switch and

ports 1 to 48 on the AT-x930-52GPX Switch
Supports PoE (15.4 watts maximum) and PoE+ (30 watts

maximum) at the switch ports
Supports powered device classes 0 to 4

Port prioritization

Mode A wiring
