Table of Contents
Advertisement
Chapter 10: Cabling the Networking Ports
Installing SP10TW Direct Connect Twinax Cables
158
The SFP and SFP+ transceiver ports on the switch support SP10TW
direct connect twinax cables. The cables are an economical way to add
10 Gbps connections over short distances. They have SFP+ transceivers
on both ends and come in lengths of 1, 3, and 7 meters.
To install SP10TW cables, perform the following procedure:
1. Select a port for the transceiver.
Ports 25 to 28 on the x530DP-28GHXm switch
Ports 49 to 52 on the x530DP-52GHXm switch
2. Remove the transceiver from its shipping container and store the
packaging material in a safe location.
3. To install the transceiver in a port in the top row, position the
transceiver with the Allied Telesis label facing up. To install the
transceiver in a port in the bottom row, position the transceiver with the
label facing down. Refer to Figure 54 on page 159.
Advertisement
Table of Contents
