Exhaust Pipe and Through-the-Propeller Exhaust
Hose Clamp Identification
IMPORTANT: Tridon types of hose clamps are used in various locations on Mercury MerCruiser power packages.
c
b
a
Tridon® Hose Clamp
®
The Tridon
hose clamp uses a worm screw with 5/16 in. hex head to engage slots cut through the band.
Description
®
Tridon
hose clamp
6.2L Exhaust
•
Exhaust system installation specifications
•
Sterndrive models 11 in. elbow height—Static waterline height. Switchable allowed, Quick and Quiet baffles required for
Corsa installation.
•
Inboard and TowSport
•
13 in. elbow height—Static waterline height.
•
Inboard exhaust systems requirement from Mercury. Mercury in‑line shutters shipped with engine.
•
TowSport engine will ship with mufflers.
•
Factory risers:
•
0" (not on inboard)
•
2" (except TowSport and inboard)
•
4" (except TowSport)
•
6" (except TowSport)
Page 7C-4
a -
®
Tridon
hose clamp
b -
Hex head screw (5/16 in.)
c -
Slot cut through the band
57208
© 2016 Mercury Marine
Nm
lb‑in.
4–4.7
35.4–41.6
90-8M0099748 eng DECEMBER 2015
lb‑ft
–