Shift Cable Installation And Adjustment; Shift Cable Installation - Mercury MerCruiser Service Manual

ZF/45C, 45IV, 63A, 65IV Transmissions
Description
Propeller shaft coupler to transmission output flange bolt
IMPORTANT: Be certain to tighten the trunnion clamping fasteners on the engine mounts that were loosened during
removal.
16. Tighten the trunnion clamping fasteners on the engine mounts that were loosened during removal to the specified torque.
Description
Trunnion clamping fasteners on the engine mounts
17. Refill the transmission with the specified fluid. Refer to Filling.
18. Connect and adjust the shift cables. Refer to Shift Cable Installation and Adjustment.
19. Connect the battery cables. Be certain to connect the negative (–) cable last.
20. Check for leaks and check the fluid level after the first engine start‑up.

Shift Cable Installation and Adjustment

Shift Cable Installation

Page 9A-16
45C
© 2016 Mercury Marine
Nm lb‑in.
68 –
Nm lb‑in.
68 –
59776
90-8M0099748 eng DECEMBER 2015
lb‑ft
50.2
lb‑ft
50.2