Mercury MerCruiser Service Manual page 265

2. Align the dowel hole in the flywheel with the dowel in the crankshaft and install the flywheel. Tighten the screws in
sequence to the specified torque.
Description
Flywheel mounting screws
3. Check the flywheel runout:
a. Attach a dial indicator to the engine block.
b. Push in on the flywheel to remove any crankshaft end play.
90-8M0099748 eng DECEMBER 2015
4
1
Tighten sequence
Engine Inspection and Assembly
59594
2
5
3
6
59612
© 2016 Mercury Marine
Nm lb‑in.
80 –
Page 3B-63
lb‑ft
59