Changing
Contact your authorized Mercury MerCruiser dealer.
Power Trim Fluid
Checking
IMPORTANT: Check the fluid level with the sterndrive unit in the full down (in) position only.
1.
Place the sterndrive unit in full down (in) position.
2.
Observe the fluid level. The fluid level must be between the "MIN" and "MAX" lines on the reservoir.
a
a -
Reservoir
b -
"MIN" and "MAX" lines
3.
Fill as necessary with the specified fluid. Refer to Filling.
Tube Ref No.
Power Trim and Steering
114
Fluid
Filling
1.
If the fluid level is below the "MIN" line, the specified fluid must be added.
2.
Remove the fill cap from the reservoir.
NOTE: The fill cap is vented.
a
90-8M0099748 eng DECEMBER 2015
Description
b
Where Used
Power trim pump
b
Power trim pump reservoir shows the oil level is below
the "MIN" line
a -
Fill cap assembly
b -
Fill cap installed
50212
© 2016 Mercury Marine
Maintenance
7876
Part No.
92-858074K01
Page 1C-13