Mercury MerCruiser Service Manual page 394

MPI ECT Fuel System
a. Remove the four mounting screws, holding the PCM relay bracket to the manifold.
a a
b. Disconnect the three PCM connectors. To release the connector, push the locking tab and rotate the lock as shown.
e
c. Disconnect the neutral switch connector, and the demand sensor harness.
Page 5A-24
a
a
b
c
© 2016 Mercury Marine
a - Mounting screws
56506
d
56514
a - Locking tab
b - ECM
c - Shift anticipate connector (not used
6.2L)
d - Neutral switch connector
e - Demand sensor harness
a
90-8M0099748 eng DECEMBER 2015