Mercury MerCruiser Service Manual page 243

1. Apply a 6.35 mm (0.250 in.) wide and 25 mm (1.00 in.) long bead of Loctite 5512 Adhesive to both the right and left side
joints of the rear seal retainer and joints of the front cover.
c
a - 1/4 in. wide bead Loctite 5512 Adhesive, 1 in. long at front cover
b - Front cover
c - 1/4 in. wide bead Loctite 5512 Adhesive, 1 in. long at rear seal retainer
Tube Ref No.
Loctite 5512 Adhesive
137
IMPORTANT: Always install a new oil pan gasket.
NOTE: The oil pan gasket and oil pan must be installed and the fasteners tightened while the adhesive is still wet to the
touch.
2. Install a new oil pan gasket.
3. Install the new oil pan gasket into the groove in the oil pan.
90-8M0099748 eng DECEMBER 2015
c
Description
Both right and left side joints of the rear seal retainer and
Engine Inspection and Assembly
a
Where Used
joints of the front cover
© 2016 Mercury Marine
a
b
59551
Part No.
92-858006K02
Page 3B-41