Mercury MerCruiser Service Manual page 263

6. Tighten the intake manifold bolts to the specified torque in the sequence and steps indicated.
Tube Ref No.
Loctite 242 Threadlocker
66
Description
Intake manifold bolts
7. Install the alternator. Refer to Section 4C ‑ Alternator Installation.
8. Install the fuel injector rail with injectors. Refer to Section 5A ‑ Fuel Rail Installation.
9. Connect the injector wire harness.
10. Install the fuel line.
11. Connect all ignition and electrical leads.
12. Install other ignition components and connect the wires.
13. Connect the crankcase ventilation hoses.
14. Connect any items that were disconnected.
90-8M0099748 eng DECEMBER 2015
5
3
1
7
Torque sequence
Description
Engine Inspection and Assembly
6
59593
8
Where Used
Intake manifold bolt threads
First torque
Second torque
© 2016 Mercury Marine
2
4
Part No.
92-809821
Nm lb‑in.
12 106.2
24 – 17.7
Page 3B-61
lb‑ft
–