Matrix SETU VGFX Quick Start Manual page 9

http://arttel.ru
SETU VGFX is available in three different configurations:
SETU VGFX8422: supports 9 SIP Trunks, 4 Mobile Ports, 2 FXO Ports and 2
1.
FXS Ports. This is the default configuration of SETU VGFX.
SETU VGFX8404: supports 9 SIP Trunks, 4 Mobile Ports and 4 FXS Ports.
2.
SETU VGFX8440: supports 9 SIP Trunks, 4 Mobile Ports and 4 FXO Ports.
3.
This Quick Start is written with reference to the default configuration. The term
SETU VGFX refers to SETU VGFX8422, unless otherwise specified.
LEDs:
There are total 10 LEDs in SETU VGFX. These LEDs are labeled as M1, M2, M3,
M4, P1, P2, P3, P4, STS and PWR as shown in the figure below. These LEDs
indicate the status of ports, various events occurring on the ports and also the error
conditions.
All LEDs are of dual colour (Red/Green) except Power LED which is of single colour
(Red). Power (PWR) and Status (STS) LEDs are non-programmable whereas all
port LEDs are programmable.
By default, LEDs labeled as M1, M2, M3 and M4 show status of Mobile Ports. LEDs
labeled as P1 and P2 show status of FXO Ports and P3 and P4 show status of FXS
Ports.
Port LEDs can be programmed for showing the status of SIP Trunks also. You can program LEDs
for showing status of maximum 8 SIP Trunks simultaneously. (Refer
more details)
Matrix SETU VGFX Quick Start
"Checking the Status" for
3