Table of Contents
Advertisement
http://arttel.ru
•
By default, Forward time adjustments type is 'None'. None is selected when
SETU VGFX is installed in the country where DST is not observed.
•
Backward Time Adjustments: Go to 'Backward Time Adjustments' and
program its parameters in the same manner as mentioned above for
Forward Time Adjustments.
•
Click on 'Submit' link at the bottom of the page to save the changes.
(Refer 'Daylight Saving Time (DST) Mode' in System Manual for more details)
20
•
Ordinal: Select 1st, 2nd, 3rd, 4th or 5th day of the month as ordinal.
•
Day: Select a day from Sunday to Saturday as the day on which DST
shall start.
•
Month: Select a month from January to December in which DST shall
start.
•
Change Time form: This is the time from when DST shall start
changing. The time is in 24 hours format and valid range for hours is
00 to 23 and for minutes is 00 to 59.
•
Change Time to: The time to which DST is to be advanced. The time
is in 24 hours format and valid range for hours is 00 to 23 and for
minutes is 00 to 59.
Date-Month Wise: If 'Date-Month wise' type of DST is selected then
select the suitable option in each of the following combo boxes:
•
Date: Select a date on which DST shall start.
•
Month: Select a month from January to December in which DST shall
start.
•
Change Time form: This is the time from when DST shall start
changing. The time is in 24 hours format and valid range for hours is
00 to 23 and for minutes is 00 to 59.
•
Change Time to: The time to which DST is to be advanced. The time
is in 24 hours format and valid range for hours is 00 to 23 and for
minutes is 00 to 59.
Matrix SETU VGFX Quick Start
Advertisement
Table of Contents
Need help?
Do you have a question about the SETU VGFX and is the answer not in the manual?